Автор Тема: HP ProBook 4510s  (Прочитано 5837 раз)

0 Пользователей и 1 Гость просматривают эту тему.

Оффлайн Antarex

  • Совет Сообщества
  • Понимающий
  • *****
  • Сообщений: 441
  • Карма: +10/-0
  • Пол: Мужской
  • Beastie © Sasha
    • Просмотр профиля
HP ProBook 4510s
« : 18 Сентябрь 2010, 05:36:51 »
HP ProBook 4510s <NX668EA>

Все комплектующие моего ноутбука работают под РУС-BSD 8.0.1 на базе FreeBSD 8.1 "из коробки", за исключением модуля WiFi (определяется после загрузки модуля if_bwn.ko, но еще не тестировался в работе), BT и веб-камеры.

Замечание: есть замечания в работе видео-подсистемы при переключении в физическую консоль FreeBSD. Возможно это связано с окружением Bios и старыми драйверами Intel 2.7.1.

Список комплектующих:

1. Intel Mobile Dual Core Celeron T3000 1.8GHz Penryn 45nm,
2. Intel GL 40 Cantiga Chipset (определяется как чипсет GM45 под FreeBSD),
3. MB HP 3072, Bios Compaq F.15, 82801IM (ICH9-M)
4. HDD SATA II FUJITSU MJA2250BH G2 (250GB),
5. Video Intel GMA X4500MHD (1366x768),
6. LAN Marvell Yukon 88E8072 10/100/1000Mbit,
7. RAM DDR2 2GB Micron PC2-6400
8. DVDRW Optiarc AD7581S,
9. Sound HDA Analog Devises AD1984A
10. Display LGD021B LP156WH2-TLQ1
11. WiFi Broadcom BCM4312
12. BT Broadcom HP Integratead module

Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-RELEASE #13: Sat Aug 21 10:13:27 MSD 2010
    root@melkorbsd.melkor.main:/buildscripts/frenzybuild/build-rusbsd/buildscripts/frenzybuild/src/sys/RUSBSD.i386 i386
module_register: module uhub/ulpt already exists!
Module uhub/ulpt failed to register: 17
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Celeron(R) Dual-Core CPU       T3000  @ 1.80GHz (1795.52-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x1067a  Family = 6  Model = 17  Stepping = 10
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x400e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,XSAVE>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 2147483648 (2048 MB)
avail memory = 2013233152 (1919 MB)
ACPI APIC Table: <HPQOEM 3072    >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <HPQOEM SLIC-MPC> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "HPET" frequency 14318180 Hz quality 900
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_ec0: <Embedded Controller: GPE 0x16> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x7120-0x7127 mem 0x90000000-0x903fffff,0x80000000-0x8fffffff irq 16 at device 2.0 on pci0
agp0: <Intel GM45 SVGA controller> on vgapci0
agp0: detected 65532k stolen memory
agp0: aperture size is 256M
vgapci1: <VGA-compatible display> mem 0x90400000-0x904fffff at device 2.1 on pci0
uhci0: <Intel 82801I (ICH9) USB controller> port 0x70a0-0x70bf irq 16 at device 26.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x3f00
usbus0: <Intel 82801I (ICH9) USB controller> on uhci0
uhci1: <Intel 82801I (ICH9) USB controller> port 0x7080-0x709f irq 17 at device 26.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x3f00
usbus1: <Intel 82801I (ICH9) USB controller> on uhci1
uhci2: <Intel 82801I (ICH9) USB controller> port 0x7060-0x707f irq 18 at device 26.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x3f00
usbus2: <Intel 82801I (ICH9) USB controller> on uhci2
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0x98904400-0x989047ff irq 19 at device 26.7 on pci0
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <network> at device 0.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci68: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci133: <ACPI PCI bus> on pcib5
mskc0: <Marvell Yukon 88E8072 Gigabit Ethernet> port 0x2000-0x20ff mem 0x90600000-0x90603fff irq 17 at device 0.0 on pci133
msk0: <Marvell Technology Group Ltd. Yukon EX Id 0xb5 Rev 0x02> on mskc0
msk0: Ethernet address: 00:26:55:bf:00:d4
miibus0: <MII bus> on msk0
e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
mskc0: [ITHREAD]
uhci3: <Intel 82801I (ICH9) USB controller> port 0x7040-0x705f irq 20 at device 29.0 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x3f00
usbus4: <Intel 82801I (ICH9) USB controller> on uhci3
uhci4: <Intel 82801I (ICH9) USB controller> port 0x7020-0x703f irq 22 at device 29.1 on pci0
uhci4: [ITHREAD]
uhci4: LegSup = 0x3f00
usbus5: <Intel 82801I (ICH9) USB controller> on uhci4
uhci5: <Intel 82801I (ICH9) USB controller> port 0x7000-0x701f irq 18 at device 29.2 on pci0
uhci5: [ITHREAD]
uhci5: LegSup = 0x3f00
usbus6: <Intel 82801I (ICH9) USB controller> on uhci5
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0x98904000-0x989043ff irq 20 at device 29.7 on pci0
ehci1: [ITHREAD]
usbus7: EHCI version 1.0
usbus7: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci134: <ACPI PCI bus> on pcib6
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x70f0-0x70ff,0x70e0-0x70ef irq 21 at device 31.2 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <Intel ATA controller> port 0x7108-0x710f,0x712c-0x712f,0x7100-0x7107,0x7128-0x712b,0x70d0-0x70df,0x70c0-0x70cf irq 18 at device 31.5 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_tz2: <Thermal Zone> on acpi0
acpi_tz3: <Thermal Zone> on acpi0
acpi_tz4: <Thermal Zone> on acpi0
acpi_tz5: <Thermal Zone> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
p4tcc1: <CPU Frequency Thermal Control> on cpu1
RTC BIOS diagnostic error ff<clock_battery,ROM_cksum,config_unit,memory_size,fixed_disk,invalid_time>
Timecounters tick every 1.000 msec
vboxdrv: fAsync=0 offMin=0x438 offMax=0x66f
ipfw2 (+ipv6) initialized, divert enabled, nat loadable, rule-based forwarding enabled, default to accept, logging disabled
load_dn_sched dn_sched FIFO loaded
load_dn_sched dn_sched PRIO loaded
load_dn_sched dn_sched QFQ loaded
load_dn_sched dn_sched RR loaded
load_dn_sched dn_sched WF2Q+ loaded
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
ad0: 238475MB <FUJITSU MJA2250BH G2 8919> at ata0-master UDMA33
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
WARNING: ad0s1 expected rawoffset 0, found 63
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
acd0: DVDR <Optiarc DVD RW AD-7581S/4H03> at ata1-master UDMA33
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
(probe0:ata1:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:ata1:0:0:0): CAM status: SCSI Status Error
(probe0:ata1:0:0:0): SCSI status: Check Condition
(probe0:ata1:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray closed)
cd0 at ata1 bus 0 scbus1 target 0 lun 0
cd0: <Optiarc DVD RW AD-7581S 4H03> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
SMP: AP CPU #1 Launched!
ugen3.2: <Chicony Electronics Co., Ltd.> at usbus3
Root mount waiting for: usbus3
Trying to mount root from ufs:/dev/ad0s1a
ugen4.2: <Qualcomm, Incorporated> at usbus4
ugen0.2: <Broadcom Corp> at usbus0
ugen6.2: <A4Tech> at usbus6
ums0: <A4Tech USB Mouse, class 0/0, rev 1.10/0.14, addr 2> on usbus6
u3g0: <Data Interface> on usbus4
u3g0: Found 3 ports.
ums0: 8 buttons and [XYZ] coordinates ID=0
msk0: link state changed to UP
hdac0: <Intel 82801I High Definition Audio Controller> mem 0x98900000-0x98903fff irq 17 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20100226_0142
hdac0: [ITHREAD]
hdac0: HDA Codec #0: Analog Devices AD1984A
hdac0: HDA Codec #2: Intel G45 HDMI
pcm0: <HDA Analog Devices AD1984A PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm1: <HDA Analog Devices AD1984A PCM #1 Analog> at cad 0 nid 1 on hdac0
pcm2: <HDA Intel G45 HDMI PCM #0 HDMI> at cad 2 nid 1 on hdac0
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
drm0: <Mobile Intel\M-B\M-. GM45 Express Chipset> on vgapci0
info: [drm] MSI enabled 1 message(s)
vgapci0: child drm0 requested pci_enable_busmaster
info: [drm] AGP at 0x80000000 256MB
info: [drm] Initialized i915 1.6.0 20080730
drm0: [ITHREAD]
OzBSD Project